50% solid content Water Decoloring Agent for Textile Paper Making
Dyeing Water Treatment
Water decoloring agent is dicyandiamide formaldehyde resin and has
high color removal of dye wastewater, by providing a large number
of cations, the negative charge is brought on dye molecules are
neutralized instability, at the same time with CW-08 Water
Decoloring Agent by a large number of hydrolysis of flocs. Can be
adsorbed dye, destabilization of the snare, from water separation,
so as to achieve the purpose of bleaching.
|Appearance||Colorless or light-color sticky liquid||Light yellow or yellow sticky liquid||Colorless or light-color sticky liquid|
|PH(30% water solution)||2.0-5.0|
Concentration and viscosity of solution can be customized according
to customers’ needs.
|Main products||Common use|
|Water Decoloring Agent||Remove color|
|Paint Flocculant A B Agent||Remove paint|
|Poly Aluminium Chloride(PAC)||coagulant|
|PolyDADMAC||Flocculant; color fixing for textile|
|Polyamine||Flocculant; color fixing for textile|
|Dicyandiamide (DCDA)||Raw material|
|ACH(Aluminum Chlorohydrate)||for drinking water treatment, antiperspirant and other fields|
|Related water treatment chemicals,etc|
|Solid Content:||more than 50%|
|Specific Gravity at 20°C:||1.1-1.3|
|PH Value (30% water Solution):||1.5-3.0|
|Solubility:||Dissolve in Water absolutely|
|Package:||Packed with 25kgs / 250kgs / 1250kgs drum|
|Storage Temperature:||Room temperature , for a long-term storage|
|1||Has stronger decolorization (50%~99%) and removal of COD (50%~80%)
for different dye effluent.|
|2||Used to de-color high-colority effluent from dyestuffs plants.|
|3||High performance to treat wastewater with Reactive, Acid, Disperse,
Direct Dyestuff etc. (Soluble and Insoluble dyestuffs).|
|4||Used to treat wastewater from textile and dyeing industry, pigment
industry, printing ink industry and paper industry.|
|5||Less sludge produced than other inorganic coagulants.|
|6||Used as retention agent in the paper & pulp processing|
|7||Faster sedimentation, better flocculation|
|8||It can be used before or after biological treatment.|
1. The product shall be diluted with water in 10-40 times and then
added into the waste water directly.After several minutes, it can
precipitate or air-float to get clear water.
2. The PH in 6-10 is more appropriate to get better result.
3. When the colority and COD are relatively high, it can be used with
the help of poly aluminum chloride, but not mixed together. In this
way, the treatment cost can be lower. Whether poly aluminum
chloride used earlier or later depends on the flocculation test and
the treatment process.
1. Mainly used for waste water treatment for textile, printing,
dyeing, paper-making, ink, etc.
2. Also can be used for color removal treatment for dyeing
high-colority waste water.
3. Used as retention agent used in the paper mills.
Package and Storage:
1. Packed with 30kg, 250kg and 1250kg IBC tank( or others according
to your requirements).
2. It is harmless, non-flammable and non-explosive
3. water decoloring agent liquid can not be placed in the sun,
storage temperature: -5—30°
1. Strong decolorization color remove
2. High efficient flocculation
3. Environmental protection
We have more than 12 years producing experience and our engineer
has been in this industry for more than 20 years. We can provide
high-quality goods and after-sales and site test service for you.
Provide needed water treatment chemicals
Provide needed technical guidance
Provide site test