High Performance Water Treatment Decoloring Agent Colorless And
1.It is a new type of high performance decolorizing flocculant, It
is a color removal chemical, specially for de-coloring,
flocculating, CODcr decreasing and other applications, used to
remove color of waste water generated by textiles process houses
and dyes industries and other fields.
2.It has high color removal of dye wastewater, by providing a large
number of cations, the negative charge is brought on dye molecules
are neutralized instability, at the same time with LSD-01 Water
Decoloring Agent by a large number of hydrolysis of flocs. Can be
adsorbed dye, destabilization of the snare, from water separation,
so as to achieve the purpose of bleaching.
3.The colored effluents, generated by the industries, when left
untreated, play havoc with reusable water resources. For process
houses, in water scarce areas, it comes as a heaven-sent
facilitating recycling of the industrial effluent into process
water. LSD-01 Water Decoloring Agent is used to solve this problem.
|1||Strong decolorization ( 80%~99%) and removal of COD ( 50%~80%)|
|2||In textile effluent treatment, compare to the ferrous sulphate and
lime, low dosage and sludge.|
|3||Faster sedimentation, better flocculation in treating.|
|4||Non-toxic, environmentally friendlly, non corrosive of suggested
|5||Can eliminate the use of alum & further ferric salts when used
as primary coagulants.|
|Appearance:||Colorless and Translucid Liquid|
|Specific Gravity at 20°C:||1.1-1.3|
|PH Value (30% Solution):||3-6|
|Solubility:||Completely Soluble With Water at Any Rate|
|Package:||30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs
net IBC drum|
|Storage Temperature:||Room temperature(10-35℃)|
1 It is mainly used for waste water treatment for textile,
printing, dyeing, paper-making, mining, ink, butcher, landfill
leachate and so on.
2 It can be used for color removal treatment for high-colority
waste water from dyestuffs plants. It is suitable to treat waste
water with activated, acidic and disperse dyestuffs.
3 It also can be used in the production process of paper & pulp
as retention agent.
|A. When have biological treatment first and after they make
chemical treatment.||B. When the treat first by chemicals, then the usual dosages are:|
|1.||Test and adjustment the pH of the effluent to 8-9|
|2.||First we apply the PAC (contact time 3-5 min with the waste water),
after then LSD-01 Water Decoloring Agent (contact time 5-10 min),
and after then anionic polyacrylamide.|
|3.||It will give too much economy if we'll adjust the pH 8-9, otherwise
the consumption of LSD-01 will be ~20% higher.|
|50-80 ppm LSD-01(raw)||80-100 ppm LSD-01(raw)|
|15-20ppm Polyaluminum Chloride(solid)||15 -30 ppm PAC(solid)|
|1 - 2 ppm Anionic polyacrylamide(solid)||1 - 2 ppm Anionic polyacrylamide(solid)|
Package and Storage:
1 It is harmless, non-flammable and non-explosive, it can not be
placed in the sun.
2 It is packed in plastic drums with each containing 30kg, 50kg,
250kg , 1000kg, 1250kg IBC tank or others according to your
3 This product will appear layer after a long-term storage, but the
effect will not be affected with stir. Storage temperature: 5-30°C